본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

초록보기

본 연구는 백자와 청자 소지에 철/코발트 황하물의 안료를 시유하여 1250℃에서 소성한 도자기 표면의 상형성을 연구하였다 . 시편의 특성은 X-선 회절분석기 , 전계방사형 주사전자현미경 , 에너지 분산형 엑스선분석기 및 UV-vis 분광계를 이용하였다 . X-선 리트벨트 정밀화 분석으로 백자소지는 석영과 뮬라이트가 , 청자소지는 뮬라이트와 plagioclase가 주결정상이다 . 백자와 청자소지에 철/코발트 황하물의 안료를 시유한 경우 백자는 스피넬상이 청자는 andradite 상의 이차상이 형성되었다 . 시편 소지의 색상은 밝기인 L* 값은 백자와 청자소지가 72.01, 60.92이고 백자가 청자소지 보다는 백색도가 높다 . 철/코발트 황하물의 안료를 도포한 시편에서 백자와 청자 시편의 경우 , L* 값은 44.89, 52.27, a* 값은 2.12, 1.40, b* 값은 1.45, 13.79를 각각 보이고 있다 . L* 값은 백자소지에 안료를 도포한 시편에서 큰 변화가 있으며 , b* 값은 소지에 따라 크게 차이가 나는 것을 알 수가 있다 . 이는 표면층에 생성되는 Fe₂O₃ 상과 andradite 결정상 생성과 밀접한 관련이 있다 .

Porcelain (white ware, celadon ware) coated with a ferrous sulfate and ferrous/cobalt sulfate was sintered at 1250°C. The specimens were investigated by HR-XRD, FE-SEM, HR-EDS, and UV-vis spectrophotometer. Through X-ray rietveld quantitative analysis, quartz and mullite were found to be the main phases for white ware, and mullite and plagioclase were found to be the main phases for celadon ware. When the pigment of ferrous/cobalt sulfate was applied, were identified as an andradite phase for celadon ware and a spinel phase for the white ware, and the amorphous phase,respectively. The L* value, which was the brightness of the specimen, was 72.01, 60.92 for white ware and celadon ware, respectively. The ferrous and ferrous/cobalt pigment coated porcelain had L* values of 44.89, 52.27 for white ware and celadon ware, respectively; with a* values of 2.12, 1.40, and at b* values of 1.45 and 13.79. As for the color of the specimens, it was found that the L* value was greatly affected by the white ware, and the b* value differed greatly depending on the clay. It was thought to be closely related to the production of the secondary phase such as Fe₂O₃ and andradite phase produced in the surface layer.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
직접 공침법을 이용한 Li3V2(PO4)3/C 복합체 양극 활물질 합성 및 특성 = Synthesis and characterization of Li3V2(PO4)3/C composite cathode materials using direct co-precipitation method 송정환 p. 167-173

리트벨트 정밀화법에 의한 Fe/Co 안료가 코팅된 도자기의 상분석 = Phase evaluation of Fe/Co pigments coated porcelain by rietveld refinement 김남훈, 김경남 p. 174-180

무용기 용융법을 활용한 형광소재용 결정화 유리 개발 = Development of novel oxyfluoride glasses and glass ceramics for photoluminescence material by a containerless processing 조혜린, 황민성, 이영진, 정재엽 p. 181-186

Zinc borosilicate 유리의 CaO 첨가에 따른 항균력 개선 효과 검증 = Effect of CaO on the antibacterial property of zinc borosilicate glasses 황민성, 정재엽 p. 187-190

연속 롤투롤 공정을 이용한 80 나노 이하의 3층 구조 필름 제조 및 특성 = Characteristics of sub-80 nm three-layered film manufactured by continuous roll-to-roll processes 김남일, 김극태 p. 191-195

Fe 도핑된 β-Ni(OH)2 마이크로결정 합성과 산소발생반응 특성 = Synthesis of Fe-doped β-Ni(OH)2 microcrystals and their oxygen evolution reactions 박제홍, 유시범, 정승원, 김병준, 김강민, 유정호 p. 196-201