|
Investigation of conditions for using mass-produced waste glass as sustainable fine aggregate for mortar
|
Minjae Son, Gyuyong Kim, Sangkyu Lee, Hongseop Kim, Hamin Eu, Yaechan Lee, Sasui Sasui, Jeongsoo Nam
|
p. 1061-1081
|
|
|
|
|
|
Influence of steel slag as a partial replacement of aggregate on performance of reinforced concrete beam
|
Tadese Birlie Mekonen, Temesgen Ejigu Alene, Yared Aklilu Alem, Wallelign Mulugeta Nebiyu
|
p. 1083-1097
|
|
|
|
|
|
Using municipal solid-waste incinerator fly ash, wash water, and propylene fibers in self-compacting repair mortar, greenhouse gas emissions potential
|
Ehsan Abdi, Gholamreza Asadollahfardi, Amirmasoud Salehi, Javad Akbardoost, Negar Esmaeili, Azadeh Panahandeh
|
p. 1099-1118
|
|
|
|
|
|
Enhancing the flexural capacity of deteriorated low-strength prestressed concrete beam using near-surface mounted post-tensioned carbon fiber-reinforced polymer bar
|
Sanghyeon Cho, Wonseok Chung, Woo-tai Jung, Jong-sup Park, Heeyoung Lee
|
p. 1119-1137
|
|
|
|
|
|
Study on the diffusion mechanism of infiltration grouting in fault fracture zone considering the time-varying characteristics of slurry viscosity under seawater environment
|
Hongbo Wang, Yunchang Yu, Peiyuan Zhang, Chunyu Yang, Hao Wen, Fansheng Zhang, Sanlin Du
|
p. 1139-1148
|
|
|
|
|
|
Proposal of a creep-experiment method and superficial creep coefficient model of CFT considering a stress-redistribution effect
|
Yu-A. Kim, Jung-Soo Lee, Seung-Hee Kwon, Jin-Kook Kim
|
p. 1149-1165
|
|
|
|
|
|
Experimental investigation on axial strength improvement of cold-formed steel jacketed concrete stub columns
|
Apisith Waenpracha, Tanyada Pannachet, Maetee Boonpichetvong
|
p. 1167-1182
|
|
|
|
|
|
(The) behavior of post-installed rebar connectors in steel frame retrofitted concrete structures under combined shear and tension
|
Rong Zeng, En-He Bao, Xia Yin, Feng Fu
|
p. 1183-1194
|
|
|
|
|
|
Eco-friendly 3D-printed concrete using steel slag aggregate : buildability, printability and mechanical properties
|
Nhi Tran, Mien Van Tran, Phuong Tran, An Khanh Nguyen, Cuong Quoc Nguyen
|
p. 1195-1212
|
|
|
|
|
|
Development length assessment of bonded post-tensioning slabs with bulb-shaped dead end anchorage
|
Jehan H. Aly, A. Farghal Maree, Mohamed Kohail, Ayman H. Khalil
|
p. 1213-1226
|
|
|
|
|
|
Protection and heat insulation performance comparison using insulation formwork in winter
|
Myung-Kwan Lim, Kyung-Yong Nam, Hyeonggil Choi
|
p. 1227-1238
|
|
|
|
|
|
High-strength self-compacting concrete production incorporating supplementary cementitious materials : experimental evaluations and machine learning modelling
|
Md. Habibur Rahman Sobuz, Fahim Shahriyar Aditto, Shuvo Dip Datta, Md. Kawsarul Islam Kabbo, Jannat Ara Jabin, Noor Md. Sadiqul Hasan, Md. Munir Hayet Khan, S.M. Arifur Rahman, Mehernaz Raazi, Ahmad Akib Uz Zaman
|
p. 1239-1266
|
|
|
|
|
|
Factors influencing measurement of dynamic elastic modulus from disk-shaped concrete specimen
|
Min Suk Kim, Jeong Jin Son, Chul-Woo Chung, Chang Joon Lee
|
p. 1267-1282
|
|
|
|
|
|
Alkali-silica reaction and residual mechanical properties of high-strength mortar containing waste glass fine aggregate and supplementary cementitious materials
|
Hamin Eu, Gyuyong Kim, Minjae Son, Sasui Sasui, Yaechan Lee, Hyeonggil Choi, Sukpyo Kang, Jeongsoo Nam
|
p. 1283-1302
|
|
|
|
|
|
Behavior of reinforced concrete circular columns subjected to double curvature buckling moment
|
Ahmed Hamoda, Sabry Fayed, Walid Mansour, Mohamed Emara
|
p. 1303-1325
|
|
|
|
|
한국학술지인용색인(NRF)
