본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

본 연구에서는 몽골 홉드 아이막에 위치한 광산의 시료를 대상으로, 텅스텐 정광을 효율적으로 회수하기 위한 선별 공정 개발을 진행하였다. 시료 분석 결과, 텅스텐은 주로 망간중석(MnWO₄)과 회중석(CaWO₄)의 형태로 존재하며, 대부분이 망간중석인 것으로 확인되었다. 시료의 WO₃ 품위는 2.55% 이며, 주요 맥석광물은 석영, 백운모, 조장석 등의 규산염 광물로 구성된 것을 확인하였다. 텅스텐을 포함하고 있는 망간중석과 회중석은 비중이 6-7로 비중이 2.6-3 정도인 맥석광물과 차이가 큰 것을 활용하여, 요동테이블로 비중 선별 실험을 진행하였다. 요동테이블 반면의 기울기, 공급수의 유량, 시료의 입도를 주요 변수로 설정하고 최적 조건을 도출하였다. 그리고 선별 공정 설계를 위하여 Cleaner와 Scavenger 공정을 단계적으로 추가하여 실험을 진행한 결과, WO₃ 품위 62.42%, 회수율 81.14%인 최종 정광을 회수하는 공정을 개발하였다.

In this study, the separation process was developed to efficiently recover tungsten concentrate using raw ore from a mine located in Khovd Aimag, Mongolia. The sample analysis results showed that tungsten mainly exists in the form of hubnerite (MnWO₄) and scheelite (CaWO₄), with most of it confirmed to be manganese tungsten. The WO₃ grade of the sample was 2.55%, and the main gangue minerals were confirmed to be composed of silicate minerals such as quartz, muscovite, and albite. Tungsten mineral have specific gravities of 6-7, which is significantly different from the specific gravity of gangue minerals, which is about 2.6-3. The optimal conditions were derived by setting the inclination angle of the shaking table, the flow rate of feed water, and the particle size of the sample as the main variables. As a result of conducting experiments by adding Cleaner and Scavenger processes in stages to design the separation process, the process was developed to recover the final concentrate with a WO₃ grade of 62.42% and a recovery of 81.14%.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
혼합 슬래그를 사용한 시멘트 혼합원료 및 클링커의 특성 연구 = Study of raw mix and clinker using slags as raw materials 이영준, 권도영, Bilguun Mend, 추용식 p. 3-13

폐 MgO-C계 내화물을 이용한 전기로 슬래그의 철 환원 기초연구 = A fundamental study on the reduction of iron in EAF slag using waste MgO-C refractory 황승욱, 왕제필 p. 14-20

자동차 전과정평가 방법론 개발 동향 = Development trends in automotive life cycle assessment methodologies : calculation of greenhouse gas emissions from automotive components using cut-off and CFF recycling models : Cut-off 및 CFF 재활용 모델에 따른 자동차 부품 온실가스 배출량 계산 김남석, 배국표, 김선빈, 이재영, 황용우 p. 21-32

건식수화공정에 의한 배연탈황 소석회 제조 = Production of hydrated lime for flue gas de-sulfurization via dry slaking process 김태형, 김영진, 김나영, 조진상 p. 33-43

몽골 홉드 아이막 텅스텐광 개발을 위한 선별 공정 개발 연구 = Research on the separation process for the development of Khovd Aimag tungsten mineral in Mongolia 김성민, Tsogchuluun Davaadorj, 정도현, 전호석 p. 44-51

Synthesis of calcium sulfoaluminate cement (CSA) from alunite and waste oyster sea shells = 굴 패각과 Alunite를 활용한 Calcium Sulfoaluminate(CSA) 합성 Fausto Moscoso Pinto, Seongho Lee, Hyung-Seok Kim p. 52-67

첨가제 혼합방법 및 건조 온도에 따른 고비표면적 소석회 연속공정 개발 = Development of a continuous process for high surface area slaked lime depending on additive mixing methods and drying temperature 김영진, 김태형, 김나영, 조진상 p. 68-74