권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
In order to investigate the effects of tempering temperature and heat-treatment path on the
microstructural and mechanical properties of ASTM Gr.92 steels, four samples with different tempering
temperatures and heat-treatment paths were prepared. Three experimental steels showed tempered
martensitic microstructures, but the sample tempered at 810℃ was presumed to retain partially untempered
martensitic microstructures due to a lower α+γ phase regime. M23C6, V(C,N), and Nb(C,N) precipitates were
observed in all samples. In addition, Cr2N was observed to be precipitated finely and uniformly by isothermal
heat-treatment. The lath width and precipitate size increased with an increase of the tempering temperature.
In particular, the lath width and precipitate size in the isothermal heat-treated samples were much smaller
than those of the tempered-only specimens. Because of a fine and uniform precipitate, a reduction of lath
width would enhance precipitation hardening, and it was shown that mechanical propertiesincluding the
hardness and tensile properties of the steels were improved by isothermal heat-treatment.| 기사명 | 저자명 | 페이지 | 원문 | 목차 |
|---|---|---|---|---|
| nm-수준의 상분리를 이용하여 제조한 고강도 고인성 철계 비정질 합금 | 이광복 ;박경원 ;이상호 ;이재철 | pp.1-7 |
|
|
| API X70 및 X80급 라인파이프강의 준정적 및 동적 비틀림 변형 거동 | 김용진 ;김양곤 ;신상용 ;이성학 | pp.8-18 |
|
|
| P122강 열화재의 소형펀치 크리프 평가 및 미세조직 분석 | 김범준 ;김문기 ;Hoang Tien Dung ;임병수 | pp.19-27 |
|
|
| 자동차 부품용 내열 알루미늄 합금의 고온 피로 변형 거동 | 박종수 ;성시영 ;한범석 ;정창렬 ;이기안 | pp.28-38 |
|
|
| ASTM Gr.92강의 미세조직 및 기계적 성질에 미치는 템퍼링 온도 및 열처리경로의 영향 | 김연근 ;한창희 ;백종혁 ;김성호 ;이찬복 ;홍순익 | pp.39-48 |
|
|
| 플라즈마 전해 산화 공정을 이용한 고 실리콘 알루미늄 합금의 표면 산화막 형성 | 김용민 ;황덕영 ;이철원 ;유봉영 ;신동혁 | pp.49-56 |
|
|
| 전계방출 투과전자현미경 분석기술을 이용한 Cu 입자 표면산화층의 정밀평가 | 이태훈 ;유정호 ;현문섭 ;양준모 ;성미린 ;권진형 ;이선영 ;김정선 ;백경호 | pp.57-61 |
|
|
| 마그네슘함량이 높은 니켈 laterite광으로부터 습식공정에 의한 니켈과 코발트 회수 | 이만승 ;김상배 ;최영윤 ;채종귀 | pp.62-70 |
|
|
| 가공 전극을 적용한 590 MPa급 DP강의 저항 점용접에 관한 연구 | 이상민 ;박영도 | pp.71-76 |
|
|
| 이주속압연된 무산소동 판재의 어닐링 특성 | 이성희 ;윤대진 ;어광준 ;김수현 ;한승전 | pp.77-84 |
|
|
| AZ31-xCa (x=0, 0.7, 2.0 wt.%) 압출재의 압축변형시 파괴거동 | 강나은 ;임창동 ;유봉선 ;박익민 | pp.85-89 |
|
|
| 무전해 니켈 도금을 이용한 절연기판상의 미세전도성 패턴 제조 | 이봉구 ;문준희 | pp.90-100 |
|
| 번호 | 참고문헌 | 국회도서관 소장유무 |
|---|---|---|
| 1 | W. R. Corwin, Nucl. Eng. & Tech. 38, 591 (2006). | 미소장 |
| 2 | C. B. Lee and D. H. Hahn, Trans. of the Korean Nuclear Society Spring Meeting, The Korean Nuclear Society, Chunchen, Korea, May 25-26 (2006). | 미소장 |
| 3 | D. C. Crawford, D. L. Porter, and S. L. Hayes, J. Nucl. Mater. 371, 202 (2007). | 미소장 |
| 4 | R. L. Klueh and A. T. Nelson, J. Nucl. Mater. 371, 37 (2007). | 미소장 |
| 5 | K. Maruyama, K. Sawada, and J. Koike, ISIJ, Int. 41, 6 (2001). | 미소장 |
| 6 | M. A. Yescas and P. F. Morris, ECCC Creep Conference, p.143. London, UK, 12-14, September (2005). | 미소장 |
| 7 | F. B. Pickering, Microstructural development and stability in high chromuim ferritic power plant steels, ed. by A. Strang and D. J. Gooch, p.1, The Institute of Materials, London (1997). | 미소장 |
| 8 | L. Lundin, S. Fallman, and H. O. Andren, Mater. Sci. & Tech. 13, 233 (1997). | 미소장 |
| 9 | B. Vandenberghe, J. Gobrel, and C. Zakine, New Materials Seminar, London, UK, 20-21, June (2007). | 미소장 |
| 10 | S. H. Kim, B. J. Song, and W. S. Ryu, J. Kor. Inst. Met. & Mater. 39, 410 (2001). | 미소장 |
| 11 | J. Orr and L. Woollard, Microstructural development and stability in high chromuim ferritic power plant steels, ed. by A. Strang and D. J. Gooch, p.53, The Institute of Materials, London (1997). | 미소장 |
| 12 | K. Sawada, K. Suzuki, H. Kushima, M. Tabuchi, and K. Kimura, Mater. Sci. & Eng. A. 480, 558 (2008). | 미소장 |
| 13 | K. Sawada, M. Taneike, K. Kimura, and F. Abe, ISIJ, Int. 44, 1243 (2004). | 미소장 |
| 14 | J. W. Simmons, B. S. Covino, Jr. J. A. Hawk, and J. S. Dunning, ISIJ, Int. 36, 846 (1996). | 미소장 |
| 15 | S. G. Hong, W. B. Lee, and C. G. Park, J. Kor. Inst. Met. & Mater. 36, 9 (1998). | 미소장 |
| 16 | A. Zielinska-Lipiec, A.Czyrska-Filemonowicz, P. J. Ennis, and O. Wachter, J. Mater. Proc. Tech. 64, 397 (1997). | 미소장 |
| 17 | J. Orr and D. Burton, Materials For Advanced Power Engineering, ed. by D. Coutsouradis et al., p.263, Kluwer Academic Publishers, Netherlands (1994). | 미소장 |
| 18 | F. Abe, Creep-resistant steels, ed. by F. Abe, Torsten-Ulf Kern and R. Viswanathan, p.279, Woodhead publishing, Cambridge, England (2008). | 미소장 |
| 19 | F. Abe, T. Noda, H. Araki, and S. Nakazawa, J. Nucl. Mater. 663, 179 (1991). | 미소장 |
| 20 | Y. Tsuchida, K. Okamotoa, and Y. Tokunaga, ISIJ, Int. 35, 317 (1995). | 미소장 |
*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내03
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.