권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
탄소복합소재 분리판의 연료전지 성능을 시험하기 위해 소형 고분자연료전지 스택을 제작하였으며
연료전지 운전에 따른 성능변화를 측정하여 탄소복합소재 분리판이 연료전지 스택의 성능에 미치는
영향을 조사하였다. 자체 설계한 가스유로로 디자인된 분리판과 MEA를 적층한 스택의 초기 성능과
장기간 운전에 따른 전압 감소를 측정하였다. 또한 장시간 운전 동안 각 셀의 전압 거동도 함께
측정하였으며 비교를 위해 흑연분리판을 이용하여 제작한 스택의 성능도 함께 시험하였다. 스택에서
각 셀의 성능은 단위전지에서의 성능과 유사하게 나타나 분리판과 스택의 구조가 셀의 성능을
충분히 보여줄 만큼 적절히 디자인된 것을 알 수 있었으며, 장시간 운전 동안 전류가 증가함에 따라
스택의 성능 감소도 점차 증가하였으며 두 종류의 스택이 유사한 성능 감소를 보여 자체 제작한
탄소복합소재 분리판이 흑연분리판과 유사한 성능을 보임을 알 수 있었다.
Small size polymer electrolyte membrane fuel cell (PEMFC) stacks were prepared
using carbon composite and graphite bipolar plates and their performances were evaluated on
reactant gas and operating time. In comparison to single cell and stack, it was identified that
home-made bipolar plate was well-designed to maximize stack performance as high as that of
single cell. During long-term operation, the performances of stacks using two different kinds
of bipolar plates were compared. The decrease of performance in both stacks was accelerated
with increasing load current. It was observed from stack test that the stack performance using
carbon composite bipolar plate was very similar to that using graphite bipolar plate.| 기사명 | 저자명 | 페이지 | 원문 | 목차 |
|---|---|---|---|---|
| 탄소복합소재 분리판을 이용한 소형 고분자전해질 연료전지 스택 제작 및 성능분석 | 한춘수 ;최만수 ;이지정 ;이재영 ;김인태 ;안정철 ;심중표 ;이홍기 | pp.81-88 |
|
|
| CIGS 박막의 전착에 관한 연구 | 이상민 ;김영호 ;오미경 ;홍석인 ;고항주 ;이치우 | pp.89-95 |
|
|
| 저합금강의 부식속도에 미치는 시편 면적의 영향 | 김민준 ;장영욱 ;유윤하 ;김종집 ;김정구 | pp.96-102 |
|
|
| 연소합성법에 의한 결함구조 Li₄Mn₅O_12_제조와 하이브리드 커패시터 적용 | 김훈욱 ;선양국 ;이범석 ;진창수 ;신경희 | pp.103-109 |
|
|
| Electrochemical performance of lithium sulfur batteries with plasticized polymer electrolytes based on P(VdF-co-HFP) | Jeong Ho Park ;Sang-Yeob Yeo ;Jung-Ki Park ;Yong Min Lee | pp.110-115 |
|
|
| 리튬 이차전지 음극용 Cu₃Si의 고온에서의 전기화학적 특성 | 권지윤 ;류지헌 ;김준호 ;채오병 ;오승모 | pp.116-122 |
|
|
| Redox Flow Battery용 일체화된 흑연/DSA 전극의 전기화학적 특성 | 김형선 | pp.123-127 |
|
|
| 납축전지 전류집전체로서 그라파이트 시트의 전기화학적 안정성과 방전성능 평가 | 안상용 ;김응진 ;윤연섭 ;김희중 | pp.128-131 |
|
|
| 전기화학적으로 석출된 망간 산화물이 산소 환원 반응에 미치는 영향 | 박성호 ;신현수 ;김정식 ;박수길 | pp.132-137 |
|
|
| 펄스 전착법을 이용한 전기분해용 망간 산화물 전극의 제조 및 특성 | 양정진 ;이미영 ;김정식 ;신현수 ;박수길 | pp.138-144 |
|
|
| 과불소화된 아크릴레이트 가교제로 제조된 직접 가교형 겔 고분자 전해질의 전기화학적 특성 | 오시진 ;심효진 ;김동욱 ;이명훈 ;이창진 ;강영구 | pp.145-152 |
|
| 번호 | 참고문헌 | 국회도서관 소장유무 |
|---|---|---|
| 1 | E. Cho and I.-H. Oh, ‘Current R&D issues on bipolar plates of PEMFC’, Polym. Sci. Tech, 15, 612 (2004). | 미소장 |
| 2 | Review and analysis of PEM fuel cell design and manufacturing ![]() |
미소장 |
| 3 | Technical cost analysis for PEM fuel cells ![]() |
미소장 |
| 4 | T.-H. Yang, “Preparation and Commercialization of Bipolar Plate”, Seminar, Fuel Cell Core Technology Center, 2006. | 미소장 |
| 5 | Y.-M. Koo, “Preparation and Evaluation of Fuel Cell Bipolar Plate”, Seminar, Fuel Cell Core Technology Center, 2009. | 미소장 |
| 6 | Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells ![]() |
미소장 |
| 7 | S.I. Heo, K.-S. Oh, J.-H. Jang, Y.-C. Yang, and K.-S. Han, ‘A study on precuring condition of the 2-step manufacturing method for PEMFC composite bipolar plates’, J. Kor. Soc. Comp. Mater., 20, 10 (2007). | 미소장 |
| 8 | U.-S. Jeon, E.A. Cho, H.-Y. Ha, S.-A. Hong, and I.-H. Oh, ‘Development of composite bipolar plates for PEM fuel cells’, Fuel Cell Symp. p283, July, 2003, Korea. | 미소장 |
| 9 | H. Kang, I. Han, and C. Lim, ‘Development of composite bipolar plate for PEMFC’, J. Kor. Soc. New & Renew. Energy, 3, 3 (2007). | 미소장 |
| 10 | Evaluation of Mechanical and Electrical Properties of Bipolar PlateMade of Fiber-reinforced Composites for PEM Fuel Cell | 소장 |
| 11 | K.-J. Kim, Y. Yun, and Y. Jeon, ‘The effect of contact resistance and electric conductivity on PEMFC performance ’, Proc. Kor. Soc. New & Renew. Energy, p133 (2007). | 미소장 |
| 12 | H.-J. Hwang, T.-H. Yang, Y.-G. Yoon, W.-Y. Lee, Y.-G. Shul, and C.-S. Kim, ‘The performance evaluation of the separator for PEMFCs’, Proc. Kor. Soc. New & Renew. Energy, p288 (2005). | 미소장 |
| 13 | W. Choi, Y. Kim, S. Yu, Y. Lee, D. Hong, and K. Ahn, ‘An Experimental Study of Short Stack on the Performance of the Proton Exchange Membrane Fuel Cell for the Residential Power generation’, Proc. Kor. Soc. New & Renew. Energy, p21 (2008). | 미소장 |
| 14 | Y. Hong, J. Oh, H. Oh, and H. Kim, ‘Investigation of Fuel Cell Catalyst Degradation using Electrochemical analysis’, Proc. Kor. Soc. New & Renew. Energy, p208 (2007). | 미소장 |
| 15 | J.-W. Lee, J.-D. Kim, and D.-R. Park, ‘Characteristics of 5 kW class proton-exchange-membrane fuel cell (PEMFC) stack according to the long-term operation’, J. Kor. Ins. Gas, 11, 40 (2007). | 미소장 |
*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내09
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.