권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
A highly porous Biphasic Calcium Phosphate (BCP) scaffold was fabricated by the sponge replica method with a microwave sintering technique. The BCP scaffold had interconnected pores ranging from 80 μm to 1000 μm, which were
similar to natural cancellous bone. To enhance the mechanical properties of the porous scaffold, infiltration of polycaprolactone (PCL) was employed. The microstructure of the BCP scaffold was optimized using various volume percentages of polymethylmethacrylate (PMMA) for the infiltration process. PCL successfully infiltrated into the hollow space of the strut formed after
the removal of the polymer sponge throughout the degassing and high pressure steps. The microstructure and material properties of the BCP scaffold (i.e., pore size, morphology of infiltrated and coated PCL, compressive strength, and porosity) were evaluated. When a 30 vol% of PMMA was used, the PCL-BCP scaffold showed the highest compressive strength. The compressive strength values of the BCP and PCL-BCP scaffolds were approximately 1.3 and 2MPa, respectively. After the PCL
infiltration process, the porosity of the PCL-BCP scaffold decreased slightly to 86%, whereas that of the BCP scaffold was 86%. The number of pores in the 10 μm to 20 μm rage, which represent the pore channel inside of the strut, significantly decreased. The in-vitro study confirmed that the PCL-infiltrated BCP scaffold showed comparable cell viability without any
cytotoxic behavior.| 기사명 | 저자명 | 페이지 | 원문 | 목차 |
|---|---|---|---|---|
| 실리콘과 탄소 동시 스퍼터링에 의한 실리콘 양자점 초격자 박막 제조 및 특성 분석 | 김현종 ;문지현 ;조준식 ;박상현 ;윤경훈 ;송진수 ;오병성 ;이정철 | pp.289-293 |
|
|
| TPBI 전자 수송층을 이용한 청색 고분자 유기발광다이오드의 전기·광학적 특성 향상 | 공수철 ;전창덕 ;유재혁 ;장호정 | pp.294-300 |
|
|
| 황산제일철과 황산제이철을 이용한 산화철 합성 | 엄태형 ;Huynh Thanh Tuan ;김삼중 ;서동수 | pp.301-306 |
|
|
| 양전자 소멸 수명 측정에 의한 양성자 조사된 BaSrFBr : Eu 박막 특성 | 임유석 ;이종용 | pp.307-311 |
|
|
| 전기방사로 제조된 다층 Poly Methyl Methacrylate (PMMA)/Poly Vinyl Alcohol (PVA) Bone Plate의 생체적합성 평가 | 곽경아 ;김영희 ;Van Viet Thai ;이병택 ;송호연 | pp.312-318 |
|
|
| 접합 공정 조건이 Al-Al 접합의 계면접착에너지에 미치는 영향 | 김재원 ;정명혁 ;장은정 ;박성철 ;Erkan Cakmak ;Bioh Kim ;Thorsten Matthias ;김성동 ; | pp.319-325 |
|
|
| Spark Plasma Sintering 법으로 제조한 CoSb₃ Skutterudite계 열전소재의 n형 첨가제 효과 | 이재기 ;최순목 ;이홍림 ;서원선 | pp.326-330 |
|
|
| PCL infiltration into a BCP scaffold strut to improve the mechanical strength while retaining other properties | Minsung Kim ;Yang-Hee Kim ;Ih-Ho Park ;Young-Ki Min ;Hyung-Seok Seo ;Byong-Taek Lee | pp.331-337 |
|
|
| NiSi 접촉과 Cu 플러그/Ti 확산방지층의 동시 형성 연구 | 배규식 | pp.338-343 |
|
*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내13
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.