본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

30 cm 급 항공용 반사 망원경계에서 외부 환경 및 내부 진동에 의해 발생하는 주 반사경의 광학적인 성능 저하를 최소화하기

위하여 주 반사경의 광기계 설계를 수행 하였다. 플렉셔를 포함한 주 반사경의 해석을 위한 경계조건으로는 광학면의 수직과

수평 방향의 중력에 의한 변형과 온도 변화 ±1℃에 의한 열 변형을 고려하였다. 반사경의 기계적인 변형은 NX 5 I-DEAS를

사용하여 해석 하였다. 최적화된 경량화 반사경과 플렉셔의 중력에 의한 광학면의 형상 변형은 RMS surface error 16 nm 이하로

초기 설계 목표값을 만족하였다. 온도 변화 ±1℃에 의한 광학면의 형상 변형과 assembly load에 의한 광학면의 형상 변형은 매우

작은 값으로 주 반사경의 변형에 영향을 주지 않음을 확인하였다.

Optimization of a 30 cm lightweight mirror was proposed with the best optical performance under various loads of gravity and

thermal loads with proper boundary conditions. A pattern for a lightweight mirror was generated based on the best optical

performance combined with ease of manufacturing for proper design parameters of physical properties of face sheet, back sheet,

rib, and web. Evaluation of the optical performances of a telescope mirror was obtained by using the finite element analysis

program, NX I-DEAS. Surface errors, individual aberration terms, such as piston, tilts, focus and other aberrations were calculated

by using Zernike polynomials. The proposed telescope mirror meets well the opto-mechanical design consideration of RMS surface

error less than 16 nm.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
파장 가변 및 스위칭이 가능한 쌍파장 어븀 첨가 광섬유 레이저 박상오 ;심영보 ;윤민석 ;추수호 ;김현주 ;권오장 ;한영근 pp.181-184

단일 주파수로 발진하는 파장 가변 어븀 첨가 광섬유 링 레이저 김륜경 ;추수호 ;한영근 pp.185-189

폴리머 코팅된 측면 연마 단주기 격자 기반 외부 굴절률 및 온도 동시 측정 센서 연구 김현주 ;전나람 ;이상배 ;한영근 pp.190-194

광자결정 광섬유기반 광신호 분배기 개발 윤민석 ;이상배 ;한영근 pp.195-199

저손실 융착접속을 이용한 광자결정 광섬유 간섭계 안진수 ;김길환 ;이관일 ;이경식 ;이상배 pp.200-205

시간영역 광 간섭 단층촬영 시스템의 소형 엔도스코프 제작 및 영상구현 김영관 ;이성헌 ;김용평 pp.206-213

30 cm 급 반사경 경량화 최적 설계 김봉호 ;이종웅 ;문일권 ;양호순 ;김학용 ;이윤우 pp.214-223

참고문헌 (12건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 SMART UAV Development Center, “Technology developments of unmanned aerial vehicle equipment,” Newsletter 13, 2-6 (2005). 미소장
2 T. M. Valente and D. Vukobratovich, “A comparison of the merits of open-back, symmetric sandwich and contoured back mirrors as light-weighted optics,” Proc. SPIE 1167, 20-36 (1989). 미소장
3 M. K. Cho, R. M. Richard, and E. A. Hileman, “A comparison of performance of lightweight mirrors,” Optical Sciences Center University of Arizona Tucson, Arizona 85721, Proc. SPIE 1340, 67-81 (1990). 미소장
4 Optimal design of cored mirror structures. 네이버 미소장
5 Hexagonal vs Triangular Core Lightweight Mirror Structures. 네이버 미소장
6 S. P. Timoshenko and S. Woinowsky-Kreger, Theory of Plate and Shells (Mcgraw-Hill, Inc., New York, USA, 1959), Chapter 3. 미소장
7 Circular Plate on Multipoint Supports 네이버 미소장
8 D. Vukobratovich, “Lightweight mirror design,” in Optomechanical Engineering Handbook, A. Ahmad, ed. (CRC Press LLC, New York, USA, 1999), Chapter 5. 미소장
9 P. R. Yoder, Jr., Opto-mechanical Systems Design, 2nd ed., (Marcel Dekker, Inc., New York, USA, 1993), Chapter 8. 미소장
10 N. L. Jung, “Lightweight design study for 1 m mirror,” Master Thesis, Kumoh National Institute of Technology, Gumi, Korea (2010). 미소장
11 D. Malacara, Optical Shop Testing, 3rd ed., (John Wiley & Sons, Inc., New York, USA, 2007), Chapter 13. 미소장
12 “I-DEAS Course Guide,” Electronic Data Systems Corporation. 미소장