본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

개착과정에서 붕락현상이 발생한 암반사면의 거동양상을 분석하였다. 개착사면 암반의 특성 분석을 위하여 시추작업을 수행하였으며, BIPS 영상 분석을 통하여 불연속면의 방향성과 시추공 내의 출현 위치를 측정하였다. 회수된 코어를 관찰하여 암반 내부의 구조적 취약성을 고찰하였다. 절리면에 협재된 팽윤성 점토광물의 조성을 X-선 회절분석을 통하여 조사하였으며, 직접전단실험을 수행하여 절리면 전단강도를 측정하였다. 사면파괴를 유발시킬 수 있는 절리들의 위치 및 방향성을 고려한 블록해석을 수행하여 규모별 블록안정성을 산출하였다. 횡단면 해석기법을 이용하여 개착과정 중에 발생할 수 있는 지반거동 양상을 분석하였으며, 안정성 확보를 위하여 소요되는 보강량을 산정하였다. 보강작업이 수행된 개착사면의 추가적인 거동양상을 계측 해석을 통하여 고찰하였다.

Failure aspects of cut-slope, which induce the sequential collapses during the excavation stage, have been analyzed. Slope rock structures are investigated by examining the orientations and positions of discontinuity planes calculated based on the BIPS image inside the boreholes. Drilled core log has been also used to identify the structural defects. Clay minerals of swelling potentials are detected through XRD analysis. Numerical analysis for slope stability has been performed by utilizing the joint shear strength acquired from the direct joint shear test. Cut-slope collapse characteristics have been studied by investigating the posture of failure-prawn joint planes and the stability of tetrahedral blocks of different sizes. Cross-section analysis has been also performed to analyze the cut-slope behavior and to estimate the amount of reinforcement required to secure the stability of cut-slope. Behavior of reinforced cut-slope is also investigated by analyzing the slope monitoring data.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
분포형 광섬유센서의 응용 및 개발 동향 채광석 ,이상필 ,이창호 ,한성재 pp.1-10

MW급 EGS 지열발전 상용화 기술개발사업의 추진 배경 및 계획 윤운상 ,송윤호 ,이태종 ,김광염 ,민기복 ,조용희 ,전종욱 pp.11-19

개착사면의 붕락요인 분석 및 보강거동 계측 조태진 ,이상배 ,이근호 ,황택진 ,강필규 ,원병남 pp.20-32

온도와 수압이 가곡광산 화강암과 석회암의 물성에 미치는 영향 윤용균 ,백영준 ,조영도 pp.33-40

침관입시험을 이용한 연약암반의 일축압축강도 추정 강성승 ,오바라 유조 ,제동광 ,박영호 pp.41-49

암석의 탄성파속도 거동특성과 역학 parameter와의 상관성 해석 이종석 ,문종규 ,최웅의 pp.50-65

균열 암반의 복합거동해석을 위한 열-수리-역학적으로 연계된 파괴역학 수치해석코드 개발 김형목 ,박의섭 ,Baotang Shen ,신중호 ,김택곤 ,이승철 ,고태영 ,이희석 ,이진무 pp.66-81

입체사진측량기법을 이용한 파쇄도 추정 한정훈 ,송재준 ,조영도 pp.82-92

참고문헌 (13건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 Monitoring of Cut-Slope Behavior with Consideration of Rock Structure and Failure Mode 소장
2 An Analysis of the Behavior of Rock Slope with Excavation-Induced Tension Cracks Located in DongHae Highway Construction Site 소장
3 개착면 내부에서의 절리분포 예측을 통한 사면 해석 소장
4 황진연, 김선경, 김춘식(1999), “부산시 문현동 산사태지 역의 지질 및 점토광물에 대한 연구”, 한국지반공학회지, 15.1, 113-125. 미소장
5 Strength, deformation and conductivity coupling of rock joints 네이버 미소장
6 Hoek, E. and Bray, J.(974), Rock slope Engineering, The Institution of Mining and Metallurgy, London. 미소장
7 Mahtab, M. A. and Yegulalp, T. M.(1982), “A rejection criterion for definition of clusters in orientation data”, In R. E. Goodman and F. E. Heuze (eds), In Issues in Rock Mechanics Proceedings of the 22nd Symposium on Rock Mechanics, American Institute of Mining Metallurgy and Petroleum. Engineers, New York, 116-123. 미소장
8 Fabric tensor for discontinuous geological materials. 네이버 미소장
9 Raax(1997), Borehole Image Processing System Information. Sapporo, Japan. 미소장
10 Read, S., Richards, L. and Cook, G.(2003), “Rock mass defect patterns and the Hoek-Brown failure criterion”, Proc. 10th Cong. ISRM, South Africa. 947-954. 미소장
11 Terzaghi, K.(1946), Rock defects and loads on tunnel supports, In: rock tunnelling with steel supports, Youngstown, 15-99. 미소장
12 Specification of fabric shapes using an eigenvalue method 네이버 미소장
13 Yoon, K.S., T.F. Cho, B.O. You, B.O. and K.S. Won (2003), A new approach for borehole joint investigation development of discontinuity orientation measurement drilling system, Proc. 10th Cong. ISRM. South Africa, 1355-1358. 미소장