본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

Intermittent CSR 측정법을 이용하여 hydrogenated NBR(이하 HNBR) 오링의 노화 거동과 수명 예측에 관하여 연구하였다. HNBR 오링의 가교 구조는 황 가교와 퍼옥사이드 가교를 이용하여 각각 제조하였다. Intermittent CSR jig는 오링의 실제 사용환경을 고려하여 설계 제작하였다. 각 측정 조건에 따른 마찰 영향, 열 손실 영향 및 Mullins effect에 의한 intermittent CSR의 응력 거동 변화를 관찰하였다. 오링의 노화 거동은 100~120 ℃에서의 가속 노화 연구를 통하여 관찰하였다. 고장조건 50%와 40%에 대하여 HNBR 오링은 선형 노화 거동을 나타내었으며, Arrhenius relationship을 만족시켰다. HNBR-S 오링의 활성화 에너지는 70.6 kJ/mol로 나타났으며, Arrhenius plot으로부터 오링의 예측 수명은 고장 조건 50%와 40%에 대하여 각각 31.1년과 33.7년으로 나타났다. HNBR-P오링의 활성화 에너지는 72.1 kJ/mol로 나타났으며, Arrhenius plot으로부터 오링의 예측 수명은 고장 조건 50%와 40%에 대하여 각각 34.0년과 36.5년으로 나타났다. 황 가교에 비하여 퍼옥사이드 가교에서 고무의 노화 속도가 느리게 나타났으며, 활성화 에너지는 높게 나타났다.

Intermittent CSR testing was used to investigate the degradation of a hydrogenated NBR(HNBR) O-rings, and also the prediction of its life-time. The cure system of HNBR O-ring was controlled as sulfur cure and peroxide cure system. An intermittent CSR jig was designed taking into consideration the O-ring's environment under use. The testing allowed observation of the effects of friction, heat loss, and stress relaxation by the Mullins effect. Degradation of O-rings by thermal aging was observed between 100 and 120 ℃. In the temperature range of 100 - 120 ℃, O-rings showed linear degradation behavior and satisfied the Arrhenius relationship. The activation energy of HNBR-S was about 70.6 kJ/mol. From Arrhenius plots, predicted life-times of HNBR-S O-ring were 31.1 years and 33.7 years for 50% and 40% failure conditions, respectively. In case of HNBR-P, the activation energy was about 72.1kJ/mol, and predicted life-times were 34.0 years and 36.5 years for 50% and 40% failure conditions, respectively. The peroxide cure system showed slower degradation rate and higher activation energy than the sulfur cure system.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
고성능 방사선 고분자 차단막 기술동향 이기쁨 ,박성은 ,김인우 ,정광운 ,이홍기 ,나창운 pp.94-101

타이어 인너라이너용 고차단화 기술 강용구 ,이성필 ,한민현 pp.102-111

가스 차단을 위한 유·무기 하이브리드 소재기술 김기석 ,박수진 pp.112-117

항공기용 탄소섬유강화 복합재료의 기술동향 김기석 ,박수진 pp.118-124

Concentration effects on improved mechanical properties of chopped kenaf fiber filled polypropylene composite Jeong Seok Oh ,Seong-Hoon Lee ,Kwang-Jea Kim pp.125-131

Thermal aging behavior of H-NBR/NBR blend Won Seok Choi ,Gun Wan Kim ,Je Sung Do ,Myung Ho Yoo ,Sung Hun Ryu pp.132-137

무기 충전제가 EPDM 배합물의 특성에 미치는 영향 최성신 ,김옥배 pp.138-143

간헐 압축응력 완화를 이용한 가교 구조가 hydrogenated NBR 오링의 수명에 미치는 영향 연구 이진혁 ,배종우 ,김정수 ,황태준 ,최유석 ,백광세 ,조남주 pp.144-151

NR/CR 고무블랜드에서의 CR조성비가 가황 및 물성에 미치는 영향 안원술 ,박동률 pp.152-157

해수에서 폴리올 종류가 폴리우레탄 폼의 물성에 미치는 영향 김상범 pp.158-163

펄라이트를 첨가한 실리콘 고무 복합체의 내화 및 난연 특성 향상에 관한 연구 이병갑 ,이종혁 ,방대석 ,원종필 ,장일영 ,박우영 ,지광환 pp.164-170

참고문헌 (10건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 ISO 11346, “Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use” (2004). 미소장
2 ISO 3384, “Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and elevated temperatures” (2005). 미소장
3 Compression stress relaxation 네이버 미소장
4 P. Tuckner, “Compression, Compression stress relaxation test comparisons and development”, SAE Technical report 2000-01-0752 (2001). 미소장
5 P. Tuckner, “Compression stress relaxation testing - comparisons, methods, and correlations”, SAE Technical report 2001-01-0742 (2001). 미소장
6 Long-term stress relaxation prediction for elastomers using the time–temperature superposition method 네이버 미소장
7 K. T. Gillen, M. Celina, and R. Bernstein, “Validation of improved methods for predicting long-term elastomeric seal lifetimes from compression stress-relaxation”, Polym. Degrad. Stab., 82, 25 (2003). 미소장
8 Life-time Prediction of a FKM O-ring using Intermittent Compression Stress Relaxation (CSR) and Time-temperature Superposition (TTS) Principle 소장
9 Non-Arrhenius behavior for oxidative degradation of chlorosulfonated polyethylene materials 네이버 미소장
10 R. W. Ogden and D. G. Roxburgh, “A pseudo-elastic model for the Mullins effect in filled rubber”, Proceedings of the Royal Society of London, Series A, 455, 5861 (1999). 미소장