본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

광 변색 물질로 1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)-3,3,4,4,5,5-hexafluoro-1-cyclopentene(BTHFC)를 사용하는 유-무기 혼성 코팅막이 금속 알콕사이드인 tetramethoxysilane(TMOS), 다양한 실란 커플링제, 그리고 용매와 같은 다양한 반응 조건하에서 제조되었다. 제조된 코팅 막 중에서 상대적으로 비극성인 실린 커플링제를 사용한 경우, 광 변색 유기물인 BTHFC는 우수한 흡광도 및 소색속도를 나타내었다. 더욱이 용매 THF 존재 하에서TMOS와 methacryloyloxypropyltrimethoxysilane(MPTMS)의 몰 비가 1:1로 하여 제조되었을 때 흡광도와 소색속도는 크고 빠른 것을 알 수 있었다. 연필강도는 TMOS의 함량이 증가할수록 증가한 반면, 투과도는 상대적으로감소하였다.

Organic-inorganic hybrid coating film using 1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)-3,3,4,4,5,5-hexafluoro-1-cyclopentene (BTHFC) as a photochromic material was prepared under various reaction conditions such as the amounts of tetramethoxysilane (TMOS), various silane coupling agents, and solvent. It was found that color-fading speed and absorbance of the coating film was strongly dependent upon the polarity of silane coupling agent and solvent. In addition, the mole ratio of TMOS and methacryloyloxypropyltrimethoxysilane (MPTMS) was an important factor to determine color-fading speed and absorbance of the coating film. With increasing TMOS contents in coating film, the pencil hardness was increased. On the other hands, the transmittance of coating film was relatively decreased with the increase of TMOS.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
초임계 유체를 이용한 PLGA 입자 제조에 첨가제가 미치는 영향 정인일, 함승주, 임교빈, 유종훈 pp.1-8

전방향족 폴리에스터 열경화성 액정의 합성과 특성 문현곤, 정명섭, 장진해 pp.9-15

1,2-Bis(2,4-dimethyl-5-phenyl-3-thienyl)-3,3,4,4,5,5-hexafluoro-1-cyclopentene을 사용한 유-무기 혼성 광 변색 코팅 막의 제조 및 특성 이창호, 이상구, 이종대 pp.16-21

졸-젤 법을 이용한 Al(OH)₃ 처리된 그래핀/에폭시 복합체의 열 및 전기전도 특성 분석 김지원, 임현구, 한중근, 김주헌 pp.22-28

아크릴산 단량체와 아지리딘 경화제 함량에 따른 점착제의 점착물성 변화 최환석, 황효연, 정선경, 이승구, 이기윤 pp.29-33

초임계 이산화탄소를 이용한 Poly(butylene succinate) 발포 손재명, 송권빈, 강병욱, 이광희 pp.34-40

친수성 Poly(ethylene glycol)을 이용한 프란루카스트 고체분산체의 제조 및 특성 분석 김형은, 황준석, 조선행, 김영진, 허강무 pp.41-46

Preparation and characterization of electrospun PAN/TiO₂ fiber mat by electron beam irradiation Phil-Hyun Kang, Joon-Pyo Jeun, Dong-Kwon Seo, Hyun-Bin Kim, Young-Chang Nho pp.47-52

Al계 유기금속화합물 혼합촉매 시스템을 이용한 L-lactide 벌크중합 특성 연구 노이현, 고영수 pp.53-58

두께와 노치생성방법에 따른 플라스틱 수지의 충격강도 변화에 관한 연구 김현, 이대섭, 임재수, 류민영 pp.59-64

플라즈마 처리된 폴리프로필렌 표면 위에 글리시딜메타크릴레이트의 에멀젼 그래프팅 지한솔, 류욱연, 최호석, 김재하, 박한오 pp.65-70

감마선에 의해 제조된 Poly(vinyl alcohol) 하이드로젤에서 Silver Nanoparticle의 제조 및 항균 특성 김현아, 박종석, 최종배, 임윤묵, 노영창 pp.71-75

시아노아조벤젠을 함유한 히드록시프로필 셀룰로오스 및 그 광가교 필름들의 열방성 액정 거동 김효갑, 정승용, 양시열, 마영대 pp.76-87

In-situ determination of structural changes in polyethylene upon creep and cyclic fatigue loading Hye-Jin Jeon, Seokgn Ryu, Sooho Pyo, Sunwoong Choi, Hyun Hoon Song pp.88-92

리튬 이차전지용 분리막에 대한 열처리의 영향 이새미, 류상욱 pp.93-97

중합촉매 시스템이 폴리페닐렌에테르의 합성에 미치는 영향 이창재, 김용태, 김진규, 김지흥, 남성우, 전붕수, 김영준 pp.98-103

Synthesis well-defined block copolymer dispersants with(2-dimethylamino)ethyl methacrylate and oligo(ethylene oxide)methyl ether methacrylate via ATRP for dispersing copper phthalocyanine pigment Eunhee Kim, Bong-Soo Kim, Ki-Suk Jung, Jin-Goo Kim, Hyun-jong Paik pp.104-110

표면 기능화된 Micelle-Templated Silica 나노세공 내 메탈로센 담지 및 에틸렌 중합 이정숙, 임진형, 고영수 pp.111-116

참고문헌 (24건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 H. Cho, S. Y. Cho, Y. M. Kim, D. J. Jeon, and E. Kim, J.Kor. Soc. Imag. Sci. Technol., 8, 29 (2002). 미소장
2 N. Sanz-Menez, V. Monnier, I. Colombier, P. L. Baldeck, M.Irie, and A. Ibanez, Dyes and Pigments, 89, 241 (2011). 미소장
3 M. Irie, Photo-reactive materials for ultrahigh-density opticalmemory, Elsevier, Amsterdam, 1994. 미소장
4 J. C. Crano and R. J. Guglielmetti, Organic photochromicand thermochromic compound, Plenum, NY, 1999. 미소장
5 E. K. Kim and M. H. Lee, Polymer(Korea), 29, 25 (2005). 미소장
6 M. Mening, K. Fries, M. Lindenstruth, and H. Schmidt, ThinSolid Films, 351, 230 (1999). 미소장
7 J. K. Kim, M. J. Kim, S. J. Park, and B. K. Ryu, J. Kor.Cer. Soc., 43, 28 (2006). 미소장
8 R. Pardo, M. Zayat, and D. Levy, C. R. Chimie, 13, 212 (2010). 미소장
9 D. H. Kim and K. C. Song, News Inf. Chem. Eng., 26, 534 (2008). 미소장
10 J. Biteau, F. Chaput, K. Lahlil, and J. P. Boilt, Chem. Mater.,10, 1945 (1998). 미소장
11 S. H. Jang, Polym. Sci. Tech., 12, 676 (2001). 미소장
12 S. E. Yun, H. G. Woo, and D. P. Kim, Polymer(Korea), 24,389 (2000). 미소장
13 M. J. Han, J. Y. Maeng, and J. Y. Seo, Polymer(Korea), 34,405 (2010). 미소장
14 A. Jitianu, M. Gartner, M. Zaharescu, D. Cristea, and E.Manea, Mater. Sci. Eng., C23, 301 (2003). 미소장
15 Y. Y. Yu and W. C. Chen, J. Mater. Chem., 82, 388 (2003). 미소장
16 J. D. Lee and C. H. Lee, J. Ind. Sci. Tech. Inst., 23, 7 (2009). 미소장
17 D. Levy and D. Avir, J. Phys. Chem., 92, 4734 (1988). 미소장
18 D. Levy, Chem. Mater., 9, 2666 (1997). 미소장
19 M. Irie, Chem. Rev., 100, 1685 (2000). 미소장
20 K. Matsuda and M. Irie, J. Photochem. Photobiol., C5, 170 (2004). 미소장
21 M. Irie, Supramol. Sci., 3, 87 (1996). 미소장
22 C. J. Yun and E. Y. Kim, NICE, 26, 526 (2008). 미소장
23 H. Cho, S. Y. Cho, Y. M. Kim, D. J. Jeon, and E. Kim, J.Kor. Soc. Imag. Sci. Technol., 8, 29 (2002). 미소장
24 N. Khummalai and V. Boonamnuayvitaya, J. Biochem.Bioph. Methods, 99, 277 (2005). 미소장