본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

The pulsed current activated sintering method (PCAS) is a new rapid sintering method that was developed recently for fabricating ceramics and composites. This method combines a high temperature for a short time with pressure application. In this work, PCAS was used to fabricate WC-5wt%Mo₂C-5wt% Co hard material using WC, Mo₂C, and Co. The WC-Mo₂C-Co was almost completely dense with a relative density of up to 100% after the simultaneous application of a pressure of 60 MPa and electric current for 11 min without grain growth. The average grain size of WC that was produced through PCAS was about 0.5-0.6 ㎛. The vickers hardness and fracture toughness of the WC-5wt%Mo₂C-5wt%Co hard materials were about 2453.5 kg/mm2 and 7.9 MPa · m^1/2^, respectively, for 60 MPa at 11200℃.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
Texture characteristics of TiN film by electron backscatter diffraction Bong-Yong Jeong pp.867-871

복합조직강의 고속인장 결과를 이용한 컴퓨터 전산모사와 실제 충돌시험 결과와의 비교 연구 방형진, 최일동, 강성규, 문만빈 pp.873-882

열간 프레스 성형공정 적용을 위한 극저탄소강의 탄소확산에 미치는 결정립 크기의 영향 강수영 pp.883-889

고주파 유도 가열에 의한 급속 나노구조 MgTiO₃화합물 합성 및 소결 강현수, 도정만, 윤진국, 박방주, 손인진 pp.891-896

아공정 Al-11.3Si-3.5Cu 합금의 응고조직 형성거동에 관한 연구 서희식, 구지호, 박경미, 이정석, 이재현, 정원섭 pp.897-905

용매정제법과 원심분리법으로 추출한 Si의 순도에 미치는 장입 원재료 순도의 영향 조주영, 서금희, 강복현, 김기영 pp.907-911

표면 요철이 발달된 캐필러리 적용에 따른 Cu 와이어의 본딩 특성 이종현, 김주형, 강홍전, 김학범, 문정탁, 류도형 pp.913-920

펄스 전류 활성 소결법을 이용한 WC-Mo₂C-Co 소결체 제조 및 기계적 특성 평가 윤희준, 방한서, 방희선, 오익현, 박현국 pp.921-929

등통로각압축공정을 이용하여 제조된 Cu-15 wt%Ag 복합재의 미세구조 이인호, 홍순익, 이갑호 pp.931-937

3층 Cu/Al/Cu 클래드재의 열처리온도에 따른 변형 및 파단거동 김인규, 하종수, 홍순익 pp.939-948

Development of MgH₂-Ni hydrogen storage alloy requiring no activation process via reactive mechanical grinding Myoung Youp Song, Young Jun Kwak, Seong Ho Lee, Hye Ryoung Park pp.949-953

Hydrogen desorption and absorption properties of MgH₂, LiBH₄, and MgH₂+LiBH₄composite Hye Ryoung Park, Myoung Youp Song pp.955-959

기계적으로 합성한 분말로부터 급속 소결에 의한 나노 구조의 Co-Al₂O₃복합재료 제조 박나라, 손인진 pp.961-966