본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

철근콘크리트 휨부재 단면은 휨강도를 확보함과 동시에 연성을 확보할 수 있도록 설계되어야 한다. 설계기준에서는 연성거동을 확보하기 위해 철근비나 중립축 깊이를 제한한다. 균형철근비 보다 적은 철근량이 배치된 단면은 연성이 확보되므로 균형철근비는 이론적인 최대철근비가 된다. 그러나 너무 적은 양의 철근량이 배치된 단면은 연성 거동과 관계 없이 균열 휨모멘트를 만족하지 못하고 취성 파괴될 수 있다. 또한, 최근 들어 고강도 재료의 사용이 증가함에 따라 최소철근비로 설계된 부재의 설계도 증가하고 있다. 이에 설계기준에서는 최소철근량에 대해서도 규정하고 있다. 콘크리트구조기준(2012)에서는 최소철근량에 대하여 철근과 콘크리트 강도의 항으로 직접적으로 규정하였다. 그러나 개정된 콘크리트구조 학회기준(2017)에서는 설계 휨강도와 균열 모멘트 사이의 관계를 통해 최소철근량을 간접적으로 제시하고 있다. 이는 피복두께에 대한 영향을 반영할 수 있지만, 재료 모델에 대한 정의가 필요하다. 따라서 이 연구에서는 콘크리트구조기준(2012)과 콘크리트구조 학회기준(2017)의 최소철근량에 대한 규정을 비교 검토하고, 다양한 해석 변수를 통해 최소철근량의 변화를 검토하여 합리적인 최소철근량 검토 방안에 대하여 고찰하였다.

A cross section in RC flexural members must be designed to satisfy flexural strength and ductility requirements simultaneously. In design provisions, ductile behavior is ensured by a sufficient reinforcement ratio or depth of the neutral axis. If the reinforcement ratio is less than the balanced reinforcement ratio, ductile behavior is secured, and this value is theoretically the maximum reinforcement ratio. But for a cross section with less steel, brittle failure can occur regardless of ductile behavior because of unqualifying a cracking moment. Recently, designs with a minimum steel ratio have been increasing along with the use of high-strength material, so in design provisions, a minimum amount of reinforcement is suggested. In the KCI(2012) standard, a minimum amount of reinforcement was suggested in terms of strength of steel and concrete. But in the revised KCI(2017) standard, a minimum amount of reinforcement was suggested by a relationship between the design flexural strength and cracking moment indirectly. This code can reflect the effect of cover thickness, but a material model must be defined. Therefore, the minimum amount of reinforcement in KCI(2012) and KCI(2017) was examined, and a rational review method was studied by parametric analysis.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
효율적인 국방M&S 인정업무 수행을 위한 평가시스템 발전방안 연구 = A study on improving plan of the evaluating system for efficient defense M&S accreditation work 한승호 p. 42-48

저사양 임베디드 시스템에서의 실시간 응답이 가능한 터치 기능 연구 = Research on touch function capable of real-time response in low-end embedded system 이용민, 한창호 p. 37-41

도림천에서 발생한 고립 및 실족사고의 원인분석을 통한 개선방안 도출에 관한 연구 = Cause analysis and improvement suggestion for flood accident in Dorimcheon : focused on the tripping and isolation accidents 이경수, 전종형, 김태훈, 김현주 p. 25-36

아민기 개질 탄소를 이용한 이산화탄소 분리 특성 = Characteristics of carbon dioxide separation using amine functionalized carbon 차왕석, 임병준, 김준수, 이성연, 박태준, 장현태 p. 17-24

크로스-결합구조의 부성 미분 저항 회로를 이용한 페리티-시간 대칭 구조의 비접촉 센서 구동 회로에 대한 연구 = Non-contact sensing method using PT symmetric circuit with cross-coupled NDR circuits 홍종균 p. 10-16

A60급 갑판 관통 관의 방화성능 평가를 위한 과도 열전달 해석과 화재시험 = Transient heat transfer analysis and fire test for evaluation on fire resistance performance of A60 class deck penetration piece 박우창, 송창용 p. 1-9

카노모델을 이용한 스마트 트렁크 기능의 고객 만족에 관한 연구 = A study on customer satisfaction for smart trunk using the Kano model 김동연, 신훈철 p. 115-123

피평가자의 외적책임감이 행위변화 의도에 미치는 영향 : The effect of ratee accountability on behavioral change intention in multi-rater performance appraisal system / 다면평가 상황을 중심으로 이승윤 p. 99-107

학교 급식종사자를 대상으로 한 위험성평가의 실효성에 관한 연구 = A study on the effectiveness of risk assessment for school food service workers 조규선, 이대호, 전진우 p. 90-98

학습정서, 학습스타일이 예비유아교사의 학습공동체참여 역량에 미치는 영향 = The influence of learning emotion and learning style on the pre-service early childhood teachers' ability to participate in the learning community 안효진, 김수정 p. 83-89

한국 노인대상 민간의료보험에 관한 선행연구 고찰 = Literature review on private health insurance for Korean older adults 최형심 p. 75-82

방파제 성능개선을 위한 평가항목 개발 = Development of evaluation factors for breakwater rehabilitation 박수열, 윤원건, 강고운, 김석 p. 67-74

호기성 액비화 발효열을 가정한 폐열회수시스템 구성 및 활용 연구 = A study on composition and utilization of waste heat recovery system assuming aerobic liquid-composting fermentation heat 임류갑, 장재경, 강태경, 손진관, 이동관 p. 56-66

효소제를 달리한 현미 찹쌀 고추장의 품질특성 비교 = Comparison of the quality characteristics of brown rice glutinous rice Gochujang with different enzymes 조하영, 홍재훈 p. 49-55

풋귤 수요증대가 제주 노지감귤 산업에 미치는 파급영향 = Economic impacts of the increase in green immature citrus demand on Jeju field citrus industry 김화년, 고성보, 김배성 p. 108-114

마늘 기계 파종을 위한 최적조건 구명 = Study on the optimum condition of mechanical sowing of a garlic 강태경, 이상희, 최용, 권영석, 김태형 p. 360-366

마일즈 훈련효과 분석에 관한 연구 = A study on the analysis of miles training effect 이용연, 이호준, 김용필 p. 353-359

몰입형과 시뮬레이터형 가상현실 훈련체계 비용 대 교육효과 분석 : Cost education effectiveness analysis of immersion-type and simulator-type virtual reality training systems : focusing on the ROK army virtual reality training system / 육군 가상현실 훈련체계를 중심으로 김도헌, 민승희, 김익현 p. 345-352

무기체계 소프트웨어 기술변경 원인분석과 개선방안 도출을 위한 데이터베이스 구축 및 활용 방안연구 = Research on DB construction and utilization measure to analyze the cause of weapon system software engineering change and derive improvement plan 오진우, 김종규, 류지선, 윤재형, 송치훈 p. 331-337

소방분야의 드론 활용방안 연구 경향 분석 = A study on the application of drone in firefight field 하강훈, 김재호, 최재욱 p. 321-330

사료내 갈색거저리 유산균 발효물 첨가의 돌가자미 치어 성장 효과 = Effect of dietary supplementation of fermented mealworm on the growth of juvenile stone flounder (Kareius bicoloratus) 조현솔, 박무억, 홍선미 p. 312-320

사장교 케이블장력 계측장치의 현장적용성 분석 = Field application analysis of cable tension measuring device on cable-stayed bridges 이현철 p. 295-311

삽교호 유입량 예측을 위한 LSTM 모형의 적용성 평가 = Evaluation of LSTM model for inflow prediction of Lake Sapgye 황병기 p. 287-294

선박의 연료품질 기반 군용선박의 연료품질 적용가능성 분석 = Feasibility study of fuel property for fuel processing design on ship and warship 황광택 p. 281-286

성인 장애인의 자기효능감 변화 유형에 따른 삶의 만족도, 대인관계역량 차이 = A study on the effects of the trajectories in self-efficacy with their life satisfaction and interpersonal competence of adults with disabilities 연은모, 최효식 p. 273-280

성인의 생애주기별 구강보건 지식과 교육 요구도에 관한 연구 : A study on the oral health knowledge and education needs of adult's lifestage : research on basic data for developing oral health education plan for well-aging / 웰에이징 구강보건교육안 개발 기초자료 조사 김설희, 김두리, 안상윤, 황혜정, 김광환 p. 263-272

숲체험 놀이에서 밧줄 놀이가 유아 자신감에 미치는 효과 = The effect of rope play through forest experience on children's self-confidence 강영식 p. 255-262

신종 코로나바이러스감염증-19에 대한 간호대학생의 지식 및 위험지각과 예방적 건강행위와의 관련성 연구 = A study on the relationship between knowledge, risk perception, preventive health behavior from coronavirus disease-2019 in nursing students 김해진, 천의영, 유장학 p. 246-254

실내 모형실험을 통한 토석류 흐름 특성 연구 = A study on the flow characteristics of debris flow using small-scaled laboratory test 유국현, 장형준, 이호진 p. 235-245

인공신경망을 이용한 주택가격지수 예측 = Prediction of housing price index using artificial neural network 이지영, 유재필 p. 228-234

심층신경망을 이용한 비운송 지중구조물의 탄산화속도 예측 모델링 = Modelling on the carbonation rate prediction of non-transport underground infrastructures using deep neural network 윤병돈 p. 220-227

염소·불화수소 탱크로리 누출사고 시 이격거리 산정을 위한 산정표 및 산정식 개발 연구 = A study on the development of calculation tables and formulas for determining separation distance in case of Cl2・HF tank-lorry leakage 전병한, 김현섭, 임상민, 이주찬, 이강산 p. 212-219

예술 심리 상담사의 감정 노동 및 직무 소진이 삶의 만족에 미치는 영향 = The effects of emotional labor and job exhaustion of art psychology counselors on life satisfaction 이은숙, 고정훈 p. 206-211

온택트 시대의 졸업학년 간호대학생이 경험한 온라인 비대면 성인간호학실습에 대한 내용분석 = Content analysis on online non-face-to-face adult nursing practice experienced by graduating nursing students in the ontact era 임소희 p. 195-205

외래·입원 환산지수에 기초한 2020년도 환산지수 산출 연구 = A study on the introduction of the outpatient and inpatient conversion factors in the 2020 physician fee contract 오동일 p. 183-194

일반 아스팔트포장의 타이어/노면 소음 특성 = Tire/road noise characteristics of general asphalt pavement 유인균, 이수형, 한대석 p. 175-182

자유학기제의 학교생활만족감과 수업흥미에 미치는 효과에 대한 종단연구 = A longitudinal study on the influences of free semester on school life satisfaction and interest in classes 곽윤정 p. 167-174

재난안전로봇의 교육적 활용을 위한 시나리오 개발 및 그 활용의 효과분석 = Development of scenario for utilization in education of disaster response robots and effective analysis of its application 강웅일 p. 160-166

전기자동차 충전기의 누전차단기 감도 전류 Trip 방지를 위한 Joule Heating 시뮬레이션 방안연구 = A study on joule heating simulation method to prevent sensitivity current trip of electric vehicle charger 이병국, 어익수 p. 150-159

정보보호 관리체계를 위한 주요 통제영역에 대한 연구 : A study on primary control area for information security management system (ISMS) : focusing on the domestic three industries / 국내 3개 산업을 중심으로 강윤철, 안종창 p. 140-149

제올라이트 굵은골재 대체율에 따른 조경포장 콘크리트의 흡수 및 강도 특성 = Absorption and strength properties of landscape paving concrete according to zeolite coarse aggregate replacement rate 나옥빈, 이기열 p. 131-139

치과용 지르코니아 착색 후 건조시간에 따른 반투명도의 차이 = Difference of translucency according to drying time after staining of dental zirconia 이주희, 박진영, 김동연 p. 124-130

CAE와 Decision-tree를 이용한 사출성형 공정개선에 관한 연구 = A study on the improvement of injection molding process using CAE and decision-tree 황순환, 한성렬, 이후진 p. 580-586

GIS를 이용한 농업시설물 데이터베이스관리시스템 개발 = Development of database management system for agriculture facilities using geographic information system 안원태, 최석근 p. 570-579

ICT기업의 외국인지분율과 기업가치에 관한 연구 = A study on the foreign ownership and firm value of ICT companies in KOSDAQ market 변지연, 임인섭 p. 563-569

ESS용 변압기의 접지방식에 의한 CMV 모델링 및 특성에 관한 연구 = A study on characteristics and modeling of CMV by grounding methods of transformer for ESS 최성문, 김승호, 김미영, 노대석 p. 587-593

Lactobacillus plantarum에 의한 흰 민들레 발효물의 항산화 및 광노화 억제 효과 = Antioxidation and anti-photoaging effects of white Taraxacum Coreanum extract by Lactobacillus plantarum 홍지우, 박하영, 김준희, 염서희, 김진우 p. 554-562

LID 기술 적용 지역 선정에 따른 물순환 개선 연구 : A study on improvement of hydrologic cycle by selection of LID technology application area : in Oncheon stream basin / 온천천 유역을 대상으로 김재문, 백종석, 신현석 p. 545-553

가중치 산출방법을 활용한 획득방안 분석단계의 기술성숙도평가 개선방안 = Improvement for technology readiness assessment with weighting method for defense acquisition project 김미선, 노은영 p. 538-544

Extensional buckling analysis of asymmetric curved beams using DQM = 미분구적법(DQM)을 사용한 비대칭 곡선 보의 신장 좌굴해석 Ki-Jun Kang p. 594-600

간호대학생의 신체적 억제대 사용 관련 간호실무 예측 요인 = Factors influencing nursing practices of physical restraints use by nursing students 하선미 p. 529-537

거푸집 공사 품질관리 요인에 대한 공사 참여 주체별 인식 비교 = Comparison of the perception of each participant on quality control factor of form work 김주용, 최규정, 박순규, 신윤석, 김백중 p. 520-528

금강하굿둑과 각종 해안구조물 설치 전, 후의 금강하구역 해수유동 양상 비교 = Comparision of tidal current patterns at Keum River estuary before and after construction of Keum River bank and coastal structures 장창환 p. 601-610

견관절 삽입술을 시행한 환자의 자기 공명 영상법에 관한 연구 = A study on MR imaging method for the patient with inserting shoulder joint suture anchor 박의철, 배석환, 류연철, 박영준, 김용권 p. 513-519

고본양정방 투여가 TCDD 유도 랫드의 생식독성에 미치는 영향 = The effects of gobonyangjeonbang administration on reproductive toxicity of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) induced rats 오지혜, 양동현, 박운규, 조충식, 황석연 p. 504-512

k-NN을 활용한 터보팬 엔진의 잔여 유효 수명 예측 모델 제안 = A proposal of remaining useful life prediction model for turbofan engine based on k-nearest neighbor 김정태, 서양우, 이승상, 김소정, 김용근 p. 611-620

공무원의 문화적 편향이 사회적 수용성에 미치는 영향 연구 : The effect of government officials' cultural bias to their social acceptance including a case study of implementing new air traffic flow management system / 새로운 항공교통시스템 도입 사례를 중심으로 김수정, 진장원, 박성식 p. 493-503

곽향의 성분 분석 및 주요 성분들의 in silico 항당뇨 타겟 단백질 탐색 = Analysis of chemical constituents of agastachis herba and in silico investigation on antidiabetic target proteins of its major compounds 최종근 p. 483-492

국내 민간항공사 조종사들의 비기술적 훈련 도입을 위한 사례연구 : The case study of startle and surprise emergency flight training for introduction of non-technical flight training to commercial airline pilots in Korea / Startle 및 Surprise 비상상황 훈련 사례를 중심으로 황재갑, 윤한영 p. 473-482

국내 치매노인의 비약물적 중재에 대한 효과분석 : Analysis of effect of non-drug intervention on the elderly with dementia in Korea : meta-analysis / 메타분석 이나래, 박윤지, 장종식 p. 466-472

국내외 표준 분류체계 조사·분석을 통한 국방규격 분류체계 개선방안 연구 = A study on improvement of Korean defense specification classification system through the domestic and foreign standard classification system research and analysis 염슬기 p. 457-465

기업혁신요인이 기업혁신성과에 미치는 영향 연구 : A study on the impact of enterprise innovation factors on enterprise innovation performance : analysis of the differences between innovation acceleration factors(high, low level) and innovation hindrance factors(high, low level) by groups / 혁신촉진요인(High, Low 수준)과 혁신저해요인(High, Low 수준)의 집단별 차이 분석 지용빈, 서영욱 p. 441-456

난청 고령자의 우울정도, 인지기능, 의사소통능력 및 정량뇌파 분석 연구 = A study on analysis of depression, cognition, communication, and quantitative electroencephalogram in hearing impaired elderly 김형재, 원희욱 p. 430-440

개선된 화질의 영상을 이용한 열화상 카메라 캘리브레이션 = Calibration of thermal camera with enhanced image 김주오, 이덕우 p. 621-628

노인의 일상생활수행능력(ADL/IADL) 결정요인에 관한 연구 : A study on the determinants of the elderly's ADL/IADL : focused on the comparison of urban and rural areas / 도시와 농촌 비교를 중심으로 이상붕, 허남욱 p. 419-429

높은 유효 표면적을 갖는 3차원 TiO2 나노벽 유사구조의 성장 = Growth of 3D TiO2 nano-wall-like structure with high effective surface area 김미리, 김기출 p. 413-418

단열패널 종류별 이격거리에 따른 화재감식 평가 = Evaluation of fire investigation as the separation distances for several types of insulation panels 김정훈, 김다슬 p. 403-412

단철근 보의 최소철근비에 대한 고찰 = A study of minimum reinforcement ratio of singly reinforced beamy 최승원 p. 396-402

대학생들의 긍정심리자본과 교수지지가 진로준비행동에 미치는 영향 = The effects of positive psychological capital and professor support on career preparation behavior in university students 임성우, 정헌식, 송민선 p. 386-395

도시계획·설계 전공 대학생들에 대한 리빙랩 프로젝트 체험 교육의 효과 분석 = An analysis of the effect of living lab project experience education for urban planning and design students 김용진, 김성희 p. 378-385

무기체계 국산화 대상 선정기준 연구 = A study of the selection criteria for localization of military weapon 유석범 p. 338-344

도시지역 거주 노인들의 사회적 지지와 주관적 행복감의 관련성 = Relationship between social support and subjective well-being of the urban elderly people 함석필, 김범호 p. 367-377

참고문헌 (7건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 Minstry of Land, Transport and Maritime Affairs, “Korea Structural Concrete Design Code”, p.342, KCI, 2012, pp.96-110. 미소장
2 S. W. Choi, M. H. Lee, G. Y. Lee, “Maximum Steel Ratio of Reinforced Concrete Flexural Members Using Material Factor”, Journal of the Korea Concrete Institute, Vol. 32, No. 2, pp.127-136, April, 2020. DOI: https://doi.org/10.4334/JKCI.2020.32.2.127 미소장
3 Korea Concrete Institute, “KCI Model Code”, p.637, Kimoondang, 2017, pp.128-158. 미소장
4 S. J. Park, T. S. Kang, D. Y. Moon, “A Study on the Flexural Reinforcement for Prevention of Brittle Failure Specified in KCI and EN Codes”, Journal of the Korea Concrete Institute, Vol. 26, No. 2, pp.211-218, April, 2014. DOI: https://dx.doi.org/10.4334/JKCI.2014.26.2.211 미소장
5 C. S. Kim and H. G. Park. “Longitudinal Reinforcement Ratio for Performance-based Design of Reinforced Concrete Columns”, Journal of the Korea Concrete Institute, Vol. 22, No. 2, pp.187-197, April, 2010. DOI: https://doi.org/10.4334/JKCI.2010.22.2.187 미소장
6 W. Kim, “Limit State Design of Concrete Structures”, p.692, Dongwha publication, 2015, pp.265-266. 미소장
7 M. Y. Kim, J. Y. Cho, H. J. Lee, “Minimum Reinforcement Specifications for Flexural Reinforced Concrete Members”, Journal of the Korea Concrete Institute, Vol. 30, No. 2, pp.179-187, April, 2018. DOI: https://doi.org/10.4334/JKCI.2018.30.2.179 미소장